33
DIGITAL VIDEO RECORDER
3. RECORD
3.1. Record General
1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the Direction
buttons [
] .
2. Change below options using [DEC/INC] buttons.
1)
Schedule Use
: This enables or disables Night Zone.
By default “OFF”
.
2)
Boot up Record
: It starts to recording without pressing [REC] button when it set
“ON”
.
3)
Disk Overwrite
: Select the record policy of the hard disk drive.
-
ON: By default
, the hard disk drive will overwrite from the beginning when it
becomes full.
-
OFF
: It stops recording after HDD is full.
5)
Auto Delete
: Allows you to configure when the DVR automatically deletes all
data from HDD. It lefts the data for below duration from current time.
[NONE
12HOURS
1DAY~ 6DAYS
1WEEK ~ 4WEEKS-> 30 DAYS]
6)
Pre-Record
: Determines the duration of the DVR stores video recorded prior to
the beginning of Event Recoding.
[ 5SEC ~ 300 SEC ]. By default 5 sec.
7)
Post- Record:
Determines the duration of the DVR continues record after Event
detection.
[5SEC ~ 300 SEC ]. By default 5 sec.
<
Note>
(1) Alarm/Motion Duration will be extended if there is another Alarm/motion
detection while Event recording.
(2) When recording, the Pre-Record and Post-Record will not be activated.
3. Select SAVE to save changes and press [ENTER] button to exit the menu.
To exit the menu without making changes, press [ESC] button.
