Battery is located in the battery housing under the solar panel.
Select the OFF position on the light prior to opening the battery
5 housing. Remove the two screws to reveal the battery.
Prior to using your solar motion light, initial charge is needed
and it should be done in the OFF position for at least three
sunny days. After the third day, your included battery will have
enough power for operation of solar motion light. Place the
light in the AUTO position: The light will illuminate for 20s when
motion is detected.
INSTALLATION INSTRUCTIONS:
USER MANUAL CL-SML2ST 1000 LUMEN DUAL HEAD SOLAR MOTION ACTIVATED SECURITY LIGHT
If you have questions or missing parts, please contact our customer care at 1-888-745-4837
INSTALLATION-1
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RECOMMENDED INSTALL HEIGHT
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- 8-10 feet above the ground.
- At such a height, the motion sensor will provide detection distance
of up to 40’.
- The motion sensor is the most sensitive as a person or object
moves parallel to the sensor head.
- The motion sensor is the least sensitive if a person or object
moves directly at the sensor head.
PLEASE NOTE
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. The maximum detection distance is 40’.
2. Do not mount the fixture near a heat source like an air conditioner, vent or furnace exhaust, or in a direction facing and
reflective object or nearby light source.
3. The light will illuminate for 20 seconds when motion is detected.
NOTE: Recommended
Tools: Power Drill,
Phillips Screwdriver
Use a power drill (not included). Drill two 1/4
holes on the chosen surface. Fasten the
motion light onto the wall with 2 wall plugs &
2 screws.
Installation is complete.
IMPORTANT TIP:
Ensure your motion light is placed
where it is exposed to direct
sunlight.
Be aware of objects such as trees
or property overhangs that may
impede the panel’s ability to
generate a charge.
This product has a two-year warranty from the date of
purchase. This guarantees against failure due to factory
defects, whether caused by materials or workmanship.
The warranty is non-transferable and only pertains to the
original purchaser. Proof of purchase is required for any
repair or replacement, so please keep your proof of purchase receipt.
This warranty does not cover normal wear and tear or damage due to
misuse. Misuse of this product includes but is not limited to:
• Using outdoors in extreme weather conditions.
• Opening the product’s housing.
• Any attempts to update, remodel or fix the unit yourself.
EYES:
• DO NOT look directly at the LED lights.
• DO NOT remove the LED lights
protective covering.
