Step 12
Connect the connectors to the NW7 board according to the wiring plan below. Hold
the back of the NW7 board with one hand when inserting the connectors to prevent
it from bending and damaging the components.
Wire colors may vary on some games.
The 2J8 connector is no longer used and must remain unplugged. The 1J8
connector is only present on the System7 games.
If most of the connectors are naturally in front of their location, some connectors
like 10J2 and 10J4 can easily be reversed. Check all the connections before
proceeding with the installation. Any damage caused by a bad connection will
simply cancel the warranty.
14
