*Contains small parts. Not suitable for children 3 years or younger. This is not a toy.
Keep battery out of reach of children. If ingested, seek medical help immediately.
Kit contains
•
Fox badge with 12 LEDs (multi-coloured)
•
Flower light sensor
•
3m stainless steel conductive thread
•
3 sewing needles
•
CR2032 3V coin cell battery
•
2x sticker sheets
•
Instructions
•
Reusable box
Features
•
12 coloured LEDs (blue, green, yellow, orange, red, pink)
•
12 light patterns
•
Multi-functional button (mode change, sleep, trigger mode)
•
PIC16F1503 microcontroller
•
Sewable hooks
•
Light sensor with two phototransistors
•
Battery life of 3-4 days with a CR2032 coin cell battery
Using your Bearables badge
Press the multi-functional button on your badge briefly to cycle through the light
patterns. Each of the LEDs will light to indicate which of the 12 patterns is currently
selected. Press and hold the button to put your badge into sleep mode.
The nifty design of the badges and sensors means that it's super-simple to connect
them. It doesn't matter which way round they're connected. Just connect one hook on
the badge to one hook on the sensor with conductive thread, then do the same with the
other two hooks.
Once a sensor is connected, press and hold the multi-functional button to put your
badge into trigger mode. Now when you trigger the sensor, the LED lights on your
badge will light up.