Scope of delivery
please check for completeness
A 2 bent stainless steel tubes with support tube
B 2 straight stainless steel tubes as stand feet
C 10 10 nuts (for 13 mm wrench)
D 13er wrenches
LAZY stainless steel stand
First of all for orientation: This is what the finished
LAZY looks like. By the way: The LAZY stainless
steel stand can be assembled by one person alo-
ne. You should only be able to handle the 13 mm
wrench.
1st step
Take a half arch (A) and place it upright so that
it stands with both ends on the ground like a
„bridge“. The easiest way to do this is to take the
half arch between your legs to have your hands
free for the next steps.
Now take the straight footrest tube (B) and place
it on the half arch so that the 4 holes of the two
welded-on perforated plates are exactly on top
of each other. Now screw the foot part (B) to the
support tubes of the half arch (A) with 4
4 nuts (C).
Step 2
Absolutely observe: The screws must be inserted
into the plates from below and the nuts must be
screwed on between the plates and the foot part.
This is the only way around. Please tighten the
screws and nuts with the two enclosed 13 mm
spanners.
Step 3
Now repeat steps 1 and 2 with the other half arch
(A) and the foot part (B) and the screws / nuts (C).
A
A
D
C
B
B
B
B
C
Screw
nut
Screw
A
C
A
