VKD4net Installation and Use Guide
5
4.5.
Connection
1.
In the
Endpoint Configuration
section, enter the
Local Port
number, i.e., the port
that the net4pro-i will listen to
1
. In the figure, the local port is set to 10001.
2.
Click
OK
to save. The word
Done!
should appear next to the OK button.
Figure 10.
Connection settings screen
3.
Click
Apply settings
on the left menu. The net4pro-i will now reboot to apply changes.
Figure 11.
Rebooting the net4pro-i
1.
It is recommended to also reboot the net4pro-i manually, by disconnecting it
from power for a few seconds.
2.
To connect the VKD4net over the Internet, you need to configure your Router for
“Port Forwarding”; see, for example the following link:
1
Make sure the “Auto increment for active connection” checkbox is unchecked.