MWA500 Wi-Fi & Ethernet Module Installation Guide
4
No. Field
Setting
11 Locale/Remote Port Number 13000
12 Network Protocol
TCP
13 Network Timeout
0
7.
Press Apply to save and restart the module.
How to reset the MWA500
To reset the module to its factory default settings, follow the next steps.
1.
While the module is connected to power, press and hold the
Reset
button (see
) for 10 sec.
2.
Wait two seconds.
3.
Press and hold the
Reset
button again and wait for the two green LEDs to extinguish. The module will now
be reset.
Limited support notice:
Due to the diverse mix of networks, we are not able to offer support on routers, modems, switches or any other
network/internet related devices or services.
Our support for internet or network related features, that are not directly related to the product are limited.
The following must be completed before calling our support team with network/internet related features:
1.
Your network/internet must be configured and working
2.
IP address and port number for the product must be pre- configured on the network
3.
Also, have the following information available: default Gateway, Subnet mask, port numbers and all other
network information
Limited Warranty
PIMA Electronic Systems Ltd. does not represent that its product may not be compromised and/or circumvented, or that the
Product will prevent any death, personal and/or bodily injury and/or damage to property resulting from burglary, robbery, fire
or otherwise, or that the Product will in all cases provide adequate warning or protection. The User understands that a properly
installed and maintained equipment may only reduce the risk of events such as burglary, robbery, and fire without warning,
but it is not insurance or a guarantee that such will not occur or that there will be no death, personal damage and/or damage
to property as a result.
Read this guide in its entirety before attempting to program or operate your system. Should you misunderstand any part of
this guide, please contact the supplier or installer of this system.
Copyright
2019 PIMA Electronic Systems Ltd. All rights reserved. E&OE
PIMA Electronic Systems Ltd.
www.pima-alarms.com
5 Hatzoref Street, Holon 5885633, Israel. Tel: +972.3.6506414 Fax: +972.3.5500442
Email: [email protected]
P/N: 4410456
*4410456*
Revision: B1, XX en, Sep. 2019
