HUNTER-PRO RSA Intruder Alarm System - User Manual for LCD keypads
26
4.1.4
Programming Short Code
This two-digit code can only arm the system.
)
Master Code
/
Enabled User Code
/
long press + User Code
)
)
X2
Short Code
ENTER/NEXT/END
) )
Enter new code (2 digits)
)
to save
Press
to exit.
4.1.5
Programming Duress Code
This code is useful when the system is connected to a security station. The
Duress code will disarm the system (if armed) and trigger the Silent Alarm,
sending a duress signal to the security station without activating the sirens.
Note the code is between 4 to 6 digits:
)
Master Code
/
Enabled User Code
/
long press + User Code
)
The following screen will appear:
)
X3
Duress Code
ENTER/NEXT/END
)
)
Enter new code (4 to 6
digits)
)
to save
Press
to exit.
4.2
Programming Time and Date
Time and date are constantly displayed on screen, used for the User Code’s
time frames and are included in the system’s memory log.
Make sure the time and date remain accurate because of the memory log
and automatic arming:
Содержание HUNTER-PRO RSA
Страница 40: ...P N 4410211 Rev A Sep 2005...