-2-
o
Antennas
Enhanced Features
o
DFOTA: Delta Firmware Over the
Air
Electrical Characteristics
o
Output Power:
Class 3 (23dBm±2dB) for LTE
FDD
Class 3 (23dBm±2dB) for LTE
TDD
Class 3 (24dBm+1/-3dB) for
WCDMA
Class E2 (27dBm±3dB) for EDGE
850/900MHz
Class E2 (26dBm+3/-4dB) for
EDGE
1800/1900MHz
Class 4 (33dBm±2dB) for GSM
850/900MHz
Class 1 (30dBm±2dB) for GSM
1800/1900MHz
o
Consumption:
20uA @Power off
3mA @Sleep, Typ.
22mA @Idle
o
Sensitivity:
LTE B1: -101.5dBm (10M)
LTE B2: -101dBm (10M)
LTE B3: -101.5dBm (10M)
LTE B4: -101dBm (10M)
LTE B5: -101dBm (10M)
LTE B7: -99.5dBm (10M)
LTE B8: -101dBm (10M)
LTE B12: -101dBm (10M)
LTE B13: -100dBm (10M)
LTE B20: -102.5dBm (10M)
LTE B28: -102dBm (10M)
WCDMA B1: -110dBm
WCDMA B2: -110dBm
WCDMA B4: -110dBm
WCDMA B5: -110.5dBm
WCDMA B8: -110.5dBm
GSM: -109dBm
DCS: -109dBm
Approvals
o
RoHS Compliant
o
CE/GCF/Vodafone (Europe)
o
Anatel (Brazil)
Content of the product package
CLM412 Add-on
A Cable
This guide
Antenna placement guidelines
Have a clear line of sight to the sky (where possible)
Be clear and free of obstacles
Be clear of metal objects
Be located away from other transmitting devices
Be securely affixed in location
Use the supplied cable
How to install the CLM412
Disconnect the control panel from AC and battery power before installing the CLM412.
Follow the next steps to install the add-on.
1.
Carefully pull out the SIM card tray (no. 4+5 in the above figure) from the socket, by gently pressing the eject bar (no. 8 in the
above figure).
2.
Align
(U)SIM 1 (main) card into slot 4, and (U)SIM 2 (backup, if in use) card into slot 5, with the metal contacts facing downwards
and the angled corner of the card positioned correctly, and carefully insert the tray into place.
3.
Connect the antenna to the antenna connector (no. 6 in the above figure), by rotating the SMA connector clockwise.
4.
Connect the add-on’s circuit board connector (no. 11 in the above figure) to its socket on the control panel’s circuit board.
5.
Connect the control panel to power.
6.
Locate the antenna where the cellular signal is strong; see the Installation guide on how to check the reception level.
7.
Set the add-on in the control panel; see how in the Installation guide.
8.
Test the add-on using the
Test and Diagnostics menu.
The LEDs
The CLM412 LEDs are described in the table below.
Label
Color and state
Description
LD1
Yellow blinks (200ms on/1800ms off)
Network search
Yellow blinks (1800ms on /200ms off)
Idle
Yellow blinks (125ms on /125ms off)
Data transfer
Yellow solid
Voice call
LD2
Red solid
Modem is registered on LTE network
Red off
Modem is registered on other network
LD3
Green solid
Power on
LD4
Blue
Used by the manufacturer
Ordering information
CLM412 Kit: P/N 8300049
