Safety
Operating Manual PSS u2 P0 F/S EIP
1004528-EN-03
| 9
3
Safety
3.1
Intended use
The module PSS u2 P0 F/S EIP may only be used in the PSS u2 system.
The module is designed for use in
}
safety-related applications with
– CIP Safety via
EtherNet/IP
}
non-safety-related applications with
–
EtherNet/IP
The module meets the requirements of EN IEC 61508 up to SIL CL 3.
Intended use includes making the electrical installation EMC-compliant. The module is de-
signed for use in an industrial environment. Interference may occur if used in other areas.
The following is deemed improper use in particular
}
Any component, technical or electrical modification to the module,
}
Use of the module outside the areas described in this manual,
}
Any use of the module that is not in accordance with the technical details.
Please also note the CIP Safety requirements (see
CIP Safety requirements on the
user [
21]
). Further information is available at www.odva.org.
3.2
System requirements
INFORMATION
The module is supported by
}
PASconfig from Version 2.0.0
– We recommend that you always use the latest version (download
from www.pilz.com).
3.3
Safety regulations
3.3.1
Safety assessment
Before using a device it is necessary to perform a safety assessment in accordance with
the Machinery Directive.
Functional safety is guaranteed for the product as a single component. However, this does
not guarantee the functional safety of the overall plant/machine. In order to achieve the re-
quired safety level for the overall plant/machine, define the safety requirements for the
plant/machine and then define how these must be implemented from a technical and organ-
isational standpoint.