Pilz PSEN sc B 5 Series, Руководство по эксплуатации, Страница: 7 / 16

PSEN b5
Operating Manual PSEN b5
1002471­EN­03
7
Please note:
}
Do not use the safety switch and actuator as a limit stop.
}
Always test the function with one of the approved evaluation devices.
Intended use
The bolt is used as a mechanical guard locking device in accordance with EN ISO 12100­2
and EN 1088. It is designed for use as a mechanical interlock in conjunction with a safety
switch of type
}
PSEN cs3.1
}
PSEN cs4.1
}
PSEN cs4.2
}
PSEN me1S
}
PSEN me1.2S
}
PSEN me1.21S
}
PSEN me1M
Possible combinations of safety switches
The bolt can be used
}
only with one safety switch PSEN cs
}
only with one safety switch PSEN me
}
or with a safety switch PSEN cs in conjunction with a safety switch PSEN me
A padlock can also be used to protect the bolt from unauthorised opening and closing.
The bolt may
not
be used on its own as a safety component to avoid hazardous plant or
machine statuses.
INFORMATION
If PLe is required, for gate monitoring for example, a safety switch PSEN cs
can also be installed in addition to a safety switch PSEN me.
Installation
CAUTION!
Do not install the bolt until you have read and understood the operating in­
structions for the safety switches PSEN cs or PSEN me! Pay particular at­
tention to the information on operating distances and installation. Make sure
that you comply with the technical details!