Pilz PSEN ma1.3-22 M12/8 VA, Руководство по эксплуатации

Страница: 7 / 23

PSEN ma1.3-22 M12/8 VA
Operating Manual PSEN ma1.3-22 M12/8 VA
1004511-EN-02
7
For your safety
WARNING!
Loss of safety function due to manipulation of the interlocking device
Manipulation of the interlocking device may lead to serious injury and death.
– You should prevent any possibility of the interlocking device being
manipulated through the use of a spare actuator.
– Keep the substitute actuator in a safe place and protect it from unau-
thorised access.
– If spare actuators are used, these must be installed as described in
Installation [ 15] .
– If the original actuators are replaced with substitute actuators, the ori-
ginal actuators must be destroyed before disposal.
} Do not remove the connector's protective cap until you are just about to connect the
unit. This will prevent potential contamination.
Unit features
} The actuator PSEN ma1.3-08 VA belongs to the safety switch.
} Coded actuator
} Safety switch with 8-pin M12 male connector
} Use with temperatures over 80 °C
} 2 safety contacts (reed contacts - N/O)
} 1 auxiliary contact (N/O)
} Design: cylindrical with threaded sleeve
– Safety switch M12
– Actuator M12: PSEN ma1.3-08 VA
}
Operation Magnetic
}
Switching voltage 24 VDC
}
Series connection via PSEN ix1 interface
}
Switch and actuator from stainless steel
Function description
Application in series connections
Operate the PSEN ma1.3-22 M12/8 VA in conjunction with the following components:
} Actuator PSEN ma1.3-08 VA (see Order reference [ 21] ),
} interface PSEN ix1 (see Order reference [ 22] ) and
} a connected evaluation device (see Requirements and connection to evaluation
devices [ 10] ).