Pilz PNOZ mc5.1p, Руководство по эксплуатации

Страница: 9 / 22

Safety
Operating Manual PNOZ mc5.1p
21248-EN-03
9
3 Safety
3.1 Intended use
The fieldbus module PNOZ mc5.1p is an expansion module of the configurable control sys-
tem PNOZmulti. It is used for communication between the configurable control system
PNOZmulti and INTERBUS LWL. INTERBUS LWL is designed for fast data exchange at
field level. The expansion module PNOZ mc5.1p is a passive INTERBUS LWL subscriber
(Slave). The basic functions of communication with INTERBUS LWL conform to EN 50254.
The central controller (Master) reads input information from the slaves and writes output in-
formation to the slaves as part of each cycle. As well as the cyclical transfer of usable data,
the fieldbus module PNOZ mc5.1p can also be used for diagnostics and commissioning
functions.
The expansion module may only be connected to a base unit from the PNOZmulti system
(please refer to the document "PNOZmulti System Expansion" for details of the base units
that can be connected).
The configurable small control systems PNOZmulti are used for the safety-related interrup-
tion of safety circuits and are designed for use in:
}
E-STOP equipment
}
Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
The expansion module may not be used for safety-related functions.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see Technical details [ 19] ).
NOTICE
EMC-compliant electrical installation
The product is designed for use in an industrial environment. The product
may cause interference if installed in other environments. If installed in other
environments, measures should be taken to comply with the applicable
standards and directives for the respective installation site with regard to in-
terference.
3.2 System requirements
Please refer to the "Product Modifications PNOZmulti" document in the "Version overview"
section for details of which versions of the base unit and PNOZmulti Configurator can be
used for this product.