PNOZ X10.1
Operating Manual PNOZ X10.1
20005-EN-10
| 9
– short circuits in the input circuit.
}
Automatic start: Unit is active once the input circuit has been closed.
}
Manual start: Unit is active once the input circuit and the start circuit are closed.
}
Monitored start: Unit is active once
– the input circuit is closed and then the start circuit is closed and opened again.
– the start circuit is closed and then opened again once the input circuit is closed.
The LED "K3" lights when the start circuit is closed and goes out when the start circuit is
opened.
}
Increase in the number of available contacts by connecting contact expandsion modules
or external contactors/relays.
Timing diagram
[1]
[2]
[3]
Legend
}
Power: Supply voltage
}
Start: Start circuit
}
Input: Input circuit
}
Output safe: Safety contacts
}
Output aux: Auxiliary contacts
}
[1]: Automatic start
}
[2]: Manual start
}
[3]: Monitored start
}
a: Input circuit closes before start circuit
}
b: Start circuit closes before input circuit
}
t
1
: Switch-on delay
}
t
2
: Delay-on de-energisation
}
t
3
: Recovery time
Installation
}
The unit should be installed in a control cabinet with a protection type of at least IP54.
}
Use the notch on the rear of the unit to attach it to a DIN rail (35 mm).