PILOTAGE NANO-X, Руководство пользователя

Страница: 10 / 40

9
START TO FLY
Power-On (Failsafe) Procedure
Your X4’s flight contoller is coded with a Power-On failsafe .
This is designed to ensure that the X4’s motor will not start unless it detects a suitable radio-control signal when
the LiPo battery is connected .
The correct Start-Up sequence is as follows:
1 . Make sure the throttle stick is in the full down position .
2 . Power on the transmitter and the red LED will be blinking . Please do not move any other stick or trim before
the TX and X4 match code and bind, or the X4 will drift . The TX LED will turn green when the TX binds with
the X4 .