Pilot Communications Viper Jet 73", Руководство пользователя, Страница: 10 / 20

Wing Servo/Flaps Assembly
1.The control horns are pre-installed at the factory, ready for use. Screw the servo to
the servo plate then install the servo arm on to the servo, making sure that this is
centred
2.Place the servo over the servo plate making sure that the arm moves freely
within the provided slot, and mark out the placement of the four screw holes. drill
out the four holes in the plate, then securely screw the servo to the inside of the
plate using the metal screws provided