29-) The elevator servo requires a
48’’ (121cm) servo lead extension.
Secure both the servo and the
extension with one of the supplied
Grey safety clips.
32-) Insert the elevator servo.
Drill small pilot holes and
secure with servo screws.
NOTE: The front of the servo
must go towards the front of
the fuselage.
31-) Cut off the string and
attach it to the servo extension
lead. Use tape to “wrap” the
string around the connector.
Inside the cockpit section, pull
on the other end of the Red
string and pull in the extension
lead.
30-) Inside the fuselage, there
is a small wood piece with a
Red string attached to it. Snap
off the wood piece.
-Bergfalke II-55 Glider-
9