Component Maintenance Manual
EFFECTIVITY: ALL
21-00-22
Page
15003
JULY 21, 2011
14.4.1.3
If the component is removed from the original packaging and is not installed on the
aircraft immediately, it is desirable that it be repackaged using the original Enviro
Systems packaging.
14.4.1.4
If the component is removed from the original packaging and is not installed on the
aircraft immediately and the original packaging is not available for repackaging,
ensure that the component is packaged in the following manner.
14.4.1.5
Ensure duct or refrigerant openings are capped to further protect the component from
contamination.
14.4.1.6
Slide the evaporator module assembly into a durable clear plastic bag and seal air
tight. Ensure that a small desiccant bag is placed into bag prior to sealing. This will
aid in keeping the component moisture free.
14.4.1.7
It is desirable at this point, to place the covered and sealed evaporator module
assembly into a protective container such as a box to prevent damage.