PIKO Digi 1, Руководство пользователя

Страница: 20 / 24

20
• Fine speed control (up to 128 steps)
• 12 control functions: lighting, sound, etc (F1 to F12)
• multiple traction with up to 4 locos
• automatic switch-off in case of short circuit
• bus system for further extensions using Loconet.
Additional accessories can be incorporated using Loconet, such as manual controls, con-
trol panels, switching panels for electromagnetic accessories and rail routes, track in
use signals, connecting modules for switching panels and the Uhlenbrock Lissy system
for loco identification and automatic layout control.
• Computer connection via the serial interface (com port) on your PC
• DCC booster connection
• Programmable track connector
• Built-in receiver for the PIKO Digi remote control and connection for additional remo-
te control receivers
• Virtual loco addresses
• Multilingual operating instructions
• Compatible with NMRA-DCC
• Updateable operating software
This should be sufficient to give you a general picture. The PPB manual contains a full
description or you can download the description from our PIKO home page
www.piko.de.
The PIKO digital basic set, # 55011
If you have a conventional PIKO layout and would like to convert it to a digital layout,
you can achieve this with the PIKO basic set.
This contains all the elements required to convert your PIKO model rail layout to a digi-
tal system:
• PIKO Digi 1
• T3 desk top transformer (#55005)
• Connection lead from transformer to PIKO Digi 1 (# 55021)
• PIKO Digi remote control (' 55012)
• Connection clip (# 55275)
• 2 PIKO loco decoders (# 56120) with loco addresses 1 and 2
First install the decoder(s) in your PIKO locomotive(s). The separate operating instruc-
tions for the decoder contain a description. Please note the pre-allocated addresses at
the decoder (see the label on the decoder) Unless you alter the addresses first, you need
these addresses to control the locos!
Now disconnect the power supply previously in use (transformer or mains adapter with
speed control) from your model rail layout.