XBS-200
User Manual
Version 02
4 Configuration via the USB Console
This description is based on an Ubuntu System with minicom installed.
Ubuntu 16.04.6 LTS
minicom Version 2.7 (kompiliert am Nov 15 2018)
Main features of the console:
•
File upload
•
Rename/Move files from r/w to secure partition
•
Cat files
•
Show hexdumps of a file
•
Execute bg96 start scripts
•
Check sensor values
•
Activate/deactivate sensors
•
Dump settings
•
Configure msi/txt
•
Delete log files
•
Show system informations
The command 'help' or '?' prints a short list of all known commands.
4.1.1 Settings of the Serial Connection
Device:
/dev/ttyACM<x>
Connection: 115200 8N1
Connect with minicom and press enter to see if the console is working properly. It happens sometimes
that the USB-driver could not connect to the XBS. If the dmesg reports an error please reboot the
Linux system. Then the connection work properly again.
4.1.2 File Upload
Start the minicom in this directory where the file for upload is located.
Enter the command 'write' the filename for xbs and the file size in Bytes. The filename can be
different from the name on the linux host system.
console> write at.txt 607
1. press <crtg>+<a> then <s>
2. from the upload menu select xmodem
3. select the file from the Linux file system
© 2020 pikkerton GmbH
XBS-200_Manual_v02.odt
Page 12/21
