Pik Rite HydraRam HR250 Скачать руководство пользователя страница 13

Страница: 13 / 84

Pik Rite Inc. | HR250 Manure Spreader 2020 |

SAFETY

AVOID HIGH-PRESSURE FLUIDS

Escaping fluid under pressure can penetrate the skin causing serious

injury.

Avoid the hazard by relieving pressure before disconnecting hydraulic or
other lines. Tighten all connections before applying pressure.

Search for leaks with a piece of cardboard. Protect hands and body from

high pressure fluids.

If an accident occurs, see a doctor immediately. Any fluid injected into the
skin must be surgically removed within a few hours or gangrene may

result. Doctors unfamiliar with this type of injury should reference a
knowledgeable medical source.

SERVICE SPREADER SAFELY

To help prevent personal injury caused by unexpected movement, be sure

to service spreader on level surface.

If spreader is connected to tractor, disengage PTO, engage parking brake
and/or place transmission in “PARK,” shut off engine and remove key.

If spreader is detached from tractor, block wheels and use safety stands to

prevent movement.

Replace all shields after lubricating or servicing.

REDUCE SPEED WHEN TOWING LOADS

Braking to stop towed loads from transport speeds can cause the towed
load to swerve and upset. Reduce speed if towed load weighs more than

the tractor and is not equipped with brakes.

Follow recommended speed-weight ratio guidelines:

• Maximum speed is 20 mph (32 km/h) when towing loads equal to or

less than the tractor.

• Reduce speed to 10 mph (16 km/h) when towing loads more than equal
and up to double the tractor weight.

• Do not tow loads exceeding double the tractor weight.

• Use additional caution when towing loads under adverse surface

conditions, when turning, and on inclines

Содержание HydraRam HR250





















































































Результаты поиска

Содержание HydraRam HR250

Отзывы:

Похожие инструкции для HydraRam HR250

Бренды по названию

Популярные бренды

Pik Rite HydraRam HR250, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание HydraRam HR250

Отзывы:

Похожие инструкции для HydraRam HR250

Бренды по названию

Популярные бренды