PiiGAB M-Bus 900S Скачать руководство пользователя | Manualshive

Страница: 21 / 68

background image

T H E M O D E R M - B U S T E C H N O L O Y

16

Ve

rs

io

n E

.3

.0

1.0

0

6.1.1

Ethernet Settings

PiiGAB M-Bus 900 can be set to static IP or dynamic IP address. This is done in
Configuration->Ethernet Settings.

6.1.2

DNS name

The gateway contains a DNS name from production that consists of gateway type and serial
number. See below for example

Pii900S/T-serial number
Example: Pii900S/T-16777360

6.1.3

Dynamic (DHCP) configuration

Figure 6-2

PiiGAB M-Bus 900S/T is always delivered set to a dynamic configuration. This is found easiest by
connecting the gateway to a DHCP server, see chapter 5.1. When you have a dynamic IP

address setting there is no need for additional settings since IP-address, netmask, gateway and
DNS-server are obtained by the DHCP server. When the gateway have got this information it

can be shown in the web interface.

When changes are made to the configuration the user needs to save this by pushing ”Save
Ethernet Settings”

In case the gateway doesn’t receive IP settings by the DHCP server it will receive a randomized

IP address after 60 seconds. The IP-address received by the gateway is between 192.168.10.3

–

192.168.10.253. The gateway needs to be restarted in order to retry to receive an IP-address

from the DHCP server. This is done by going to the Administration page and push ”Reboot”

or

disconnect the power to the gateway.

The DNS server is not set at randomized IP. Random IP is only an option if you need to set the
PiiGAB M-Bus 900S/T and do not have access to a DHCP server

6.1.3.1

Randomized IP-fallback

The gateway can be set to

inactivate randomized IP (“Set/Unset), however at delivery the

randomized IP is active (Set). To

press the button ”Set/Unset”

the randomized function can be

inactivated. Due to this the gateway will always ask the DHCP server for an IP address. There is
an advantage to set the gateway to Unset if you want it to be run with DHCP. The reason for

this is for it not to go to randomized IP and loose contact with the DHCP server in case the
network goes down or the voltage gets disconnected.

6.1.3.2

Startup times

At the start the gateway will try to ask for a DCHP server for 60 seconds before it goes to

randomized IP.
If the gateway is set to Randomized IP Unset it will control that an IP address is registered in

the gateway every ten minutes. If there is not an IP address registered the gateway will try to
reach the DHCP server to obtain a new one.

«
...
19
20
21
22
23
...
»

Содержание M-Bus 900S





































































Отзывы:

Нет отзывов

Похожие инструкции для M-Bus 900S

Бренд: JBM electronics Страницы: 20

Бренд: Verizon Страницы: 3

Бренд: Top Global Страницы: 75

Бренд: Z-Wave Страницы: 68

Internet Box 5G 2

Бренд: Sunrise Страницы: 5

Бренд: 3Com Страницы: 112

Бренд: Wieland Страницы: 2

Бренд: SST Automation Страницы: 32

Бренд: ETC Страницы: 5

Бренд: Renu Electronics Страницы: 35

Бренд: Mavix Страницы: 73

Бренд: Avaya Страницы: 60

3CRWE51196 - OfficeConnect Wireless Cable/DSL...

Бренд: 3Com Страницы: 88

Бренд: RTA Страницы: 64

Бренд: RTA Страницы: 66

Бренд: RTA Страницы: 81

Бренд: quiko Страницы: 5

Бренд: Zte Страницы: 116

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды