Getting started PiiGAB 810
Rev 1.00.01
© PiiGAB Processinformation i Göteborg AB
Page: 5
4.
PiiGAB 810’s MAC-address
On the right gable of the PiiGAB 810 you’ll find a label containing the MAC-address of your
PiiGAB 810. You can use this to identify your PiiGAB 810 with the PiiGAB M-Bus Setup
Wizard software.
Object
Starts with
MAC-address - old
00-20-4A-XX-XX-XX
MAC-address - new
00-80-A3-XX-XX-XX
5.
IP-configuration
You can either connect your PiiGAB 810 gateway to a static or DHCP network. The most
common IP-configuration of the PiiGAB 810 gateway is for static IP-address. The gateway is
by default set to DHCP when delivered.
5.1 DHCP network
If you have a network with DHCP you can connect your PiiGAB 810 gateway to it and the
gateway will receive the IP-configuration automatically.
5.2 Static IP
If you don’t have a network with DHCP you must set your PiiGAB 810 gateway to a static IP-
address.
Note: If you have an old computer you might need a network switch between your
computer and the PiiGAB 810 gateway.
1. Set your computer to a static IP-address
2. Start the PiiGAB M-Bus Setup Wizard and go to the main menu
3. Select
Change gateway IP-settings
4. Press
Next
to continue