pigtronix RINGMASTER, Руководство пользователя

Страница: 7 / 16

CHAPTER 2. ANATOMY AND FUNCTIONS 6
1. DC 18V - Use only the 18-Volt, 300mA, negative tip power
supply that came with your Pigtronix Ringmaster. Using the
wrong power supply is likely to result in a damaged pedal.
2. CV OUT - This jack is an auxiliary output for the summed
control voltage (CV) content from the tracking and modula-
tion sources. The CV OUT can be sent to other pedal CV IN
jacks that use the Hz/V tracking standard, such as the Pigtronix
Mothership 2.
3. OUTPUT - Effect output. Plug in your amp, mixer, or DI box
here.
4. CARRIER - This jack is an auxiliary input for external carrier
signals. When using the CARRIER input, the external signal
will multiply with the internal sine wave carrier in place of your
instrument signal.
Note: The internal sine wave carrier signal can be obtained from
the ring of the CARRIER jack. Using a TRS (Stereo) splitter,
the CARRIER jack can double as an external carrier input, on
the
TIP , and output for the internal tracking sine wave carrier,
on the RING .
5. INPUT - Effect input. Plug in your instrument here.