pigtronix INFINITY 2 Скачать руководство пользователя страница 10

10

Double-press Loop 1 to Stop playback.
Double-press and Hold Loop 1 to erase.
Double-press and Hold to erase works even when the other loop is playing back.
This allows you to clear the loop that is not in use, without disrupting playback.
Deleting the loop that is not in use while recording on the other loop will cause the recording to close.

Secret mode allows you to use the soft touch switch to change between VERSE / CHORUS and UNDO 

/ REDO workflows, without deleting the current loop audio.
If audio has been recorded on both LOOP 1 and LOOP 2, the last audio that was played back before 

switching to UNDO / REDO mode will become LOOP 1.
To turn on the SECRET mode, press and hold the LOOP 2 switch until the LOOP 1 and LOOP 2 LEDs 

turn green during power up. Once this operation has been performed, a sticky flag is set to allow the 

Infinity 2 to remain in SECRET mode, even when the power is turned off.
The OCTAVE LED will illuminate during boot up to indicate SECRET mode has been turned on.
To turn off the SECRET mode, press and hold the LOOP 2 switch during power up.
Note: Things can get a bit weird in Secret mode. Enjoy!

The dual outputs of the Infinity 2 can be routed for stereo output with clean pass-through and loop 

audio mixed together, or they can be configured for discrete Wet/Dry operation - where the loop 

audio is summed to Out 2, and clean pass-through audio is summed to Out 1.
To turn on the WET/DRY routing mode, press and hold the MODE switch until the LOOP 1 and LOOP 

2 LEDs turn green during power up. Once this operation has been performed, a sticky flag is set to 

allow the Infinity 2 to remain in WET/DRY routing mode, even when the power is turned off.
The STOP LED will illuminate during boot up to indicate WET/DRY routing mode has been turned on.
To turn off the WET/DRY routing mode, press and hold the MODE switch during power up.

STOP & ERASE

SECRET MODE

WET / DRY ROUTING

Содержание INFINITY 2














Отзывы: