15.
EF SWEEP – This switch determines the direction of the envelope
movement.
16.
BLEND – This switch turns on the BLEND mode causing the phase shifter
to be modulated by a combination of the Envelope (EF) and Rotary
(LFO).
When the BLEND mode is activated, you can still use the left
footswitch to change between pure Envelope mode and BLEND
mode.
17.
LFO SMOOTH – This switch automatically turns down the RESONANCE
control in LFO mode only.
18.
INVERT – This switch determines the polarity of the phase shifting. The +
setting has an overall Low Pass effect and will enhance bass. The –
side has an overall High Pass effect and will cut bass response.
Getting Started:
Basic Hook Up
1.
Unpack your EP2 and place it on a flat, stable surface.
2.
Make sure you are using the 18-Volt DC (negative center) power
supply that came with your Pigtronix EP2.
3.
Plug the power cord into the 18VDC jack on the back of the EP2 and
then plug the power adaptor into an electrical socket.
The EP2 is now powered up. To turn the device off, unplug it from the
wall or turn off the power going to the 18VDC supply.
We recommend that you do not leave your EP2 powered up for long
periods of time when it is not in use.
4.
Plug your instrument into the “IN” jack and plug your Amplifier into the
“OUT” jack.
