7
www.pifco.co
ASSEMBLY
A
Fit the Castor units to the cross bars.
B
Turn the radiator upside-down on a
scratch-free and stable surface to
prevent damage to the paint finish or
your floor surfacing.
C
Fit the two Castor units to the radiator
by placing the U bolts between the
outermost fins on each side of the
radiator.
D
Securely fasten the two Castor units onto
the radiator by screwing two Wing Nuts
onto each Foot.
USING YOUR APPLIANCE
1. Set the radiator thermostat to the minimal
position and with the wall socket power
switch in the “OFF” position, insert the plug
into the power supply.
2. The thermostat will automatically maintain
your desired room temperature.
3. Set the power switch to the “ON” position.
4. Turn the thermostat control clockwise
all the way round until you hear a click,
this sound indicates that the oil heater is
activated. Continue turning the thermostat
control clockwise to its highest setting.
5. When the indicator light is ON, the heater is
activated. The indicator light turns ON and
OFF repeatedly during use. This is normal
and shows that the thermostat is keeping
the radiator at the desired temperature.
6. There are three heat settings - choose the
desired setting to maintain a comfortable
temperature.
• Switch 1 = Low Heat
• Switch 2 = Medium Heat
• Both Switches = High Heat
NOTE: It is normal for the heater to emit some
smell and fumes when it is turned on for the
first time or when the heater has been turned
on after a long period of non-use. This will
disappear when the heater has been on for a
short while.
A
C
D
B
Содержание P43004Y
Страница 10: ...10 CUSTOMER SUPPORT TEAM 44 0 333 220 6054 NOTES ...
Страница 11: ...11 www pifco co NOTES ...