Pifco P28053, Руководство пользователя

Страница: 8 / 12

8 Customer support team: +44 (0) 333 220 6054
Inserting batteries into the power
control area:
1. Open the battery cover.
2. Make sure that the batteries are inserted
according to their polarity as indicated.
3. Replace the battery cover.
4. Turn on the switch and all of the lights
should illuminate.
• The battery type should be AAA Battery
• Different types of batteries or new and
used batteries are not to be mixed.
Always use new batteries when replacing
them.
• Batteries are to be inserted with the
correct polarity.
• Exhausted batteries are to be removed
from regulating handle and safely
disposed of.
• If the appliance and the power control
handle are to be stored or unused for
a long period, the batteries should
be removed to prevent leakage and
corrosion.
Adjusting the power:
1. Turn on the switch. All of the lights on
the panel will illuminate.
2. Press the “-” button on the indication
label and the lights will switch off
successively as the power reduces.
3. Press the “+” button on the indication
label, the lights will turn on successively,
and the power will increase at the same
time.
4. Turn off the switch to put the appliance
into standby mode. Press the switch
again to power up the appliance again.
Note:
This vacuum sweeper works best on
smooth surfaces such as wood, ceramic,
tiles and marble. It will also perform well
on hard, short-haired carpet. It should
NOT be used on long-haired carpets as
the fibres will damage the system.
Note:
The control buttons on the handle of the
vacuum cleaner require 2 x AAA batteries
to operate. Ensure the correct type
of batteries has been inserted before
attempting to use these controls.