piezosystem jena NV40/1CLE, Инструкция по эксплуатации

Страница: 9 / 21

Telefon: +49 (3641) 66880 • Fax: +49 (3641) 668866 • info@piezojena.com • http://www.piezojena.com
8
CAUTION!
•
Allow adequate ventilation around the units so that heat can properly dissipate. Do
not block ventilated openings or place the units near a radiator, oven or other heat
sources. Do not put anything on top of the units except those that are designed for
that purpose (e.g. actuators).
•
Work with the units only in a clean and dry environment! Only specially prepared
units (e.g. actuators) can work under other conditions!
•
piezosystem jena does not give any warranty for damages or malfunction caused
by additional parts not supplied by piezosystem jena . Additional cables or
connectors will change the calibration and other specified data. This can change
the specified properties of the units and cause them to malfunction.
•
Piezoelementes are sensitive systems capable of the highest positioning accuracy.
They will demonstrate their excellent properties only if they are handled correctly!
Please mount them properly only at the special mounting points.
•
Do not place any heavy objects on any cables (e.g. power cords, sensor cables,
actuator cables, optical cables). Damage may cause malfunction or shock or fire!
•
Do not place the units on a sloping or unstable cart, stand or table as they may fall
or not work accurately.
Immediately unplug your unit from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
•
when the power cord or plug is damaged
•
if liquid has been spilled or objects have fallen into the unit
•
if the unit has been exposed to rain or water
•
if the unit has been dropped or the housing is damaged
6.1. installation, power supply
RISK OF ELECTRIC SHOCK
•
Do not insert or unplug the power plug with wet hands, as this may result in
electrical shock.
•
Do not install in rooms, where inflammable substances are stored. If flammable
substances come into contact with electrical parts inside, this may result in fire or
electrical shock.
•
Do not damage or modify the power cord. Also, do not place heavy objects on the
power cord, or pull on or excessively bend it, as this could cause electrical damage
and result in a fire or electrical shock.
•
Always grasp the plug portion when unplugging the power plug. Pulling on the
power cord may expose or snap the core wire, or otherwise damage the power