piezosystem jena NV200/D NET, Инструкция по эксплуатации

Страница: 12 / 29

12
CEO: Dr. Bernt Götz • Phone +493641/66880 • Fax +493641/668866 • www.piezosystem.com
8.3.3 I/O connector
Type: 15 pin D-Sub HD jack
Pin Label Description
1 MOD
Analog modulation input (0...10V), (Impedance 1 MΩ)
2 MON2 Not used
3 TRG in
Trigger input (TTL, 0 / 3,3V…5V)
4 SPI: CLK SPI clock (3,3V logic, slave input)
5 DGND Digital ground (for SPI & Trigger)
6 AGND Analog ground (for MOD & MON)
7 DGND Digital ground (for SPI & Trigger)
8 DGND Digital ground (for SPI & Trigger)
9 SPI: MOSI MOSI (3,3V logic, slave input)
10 TxD Not used
11 MON Analog monitor output (0 ...10V)
12 TRG out Trigger output (TTL 3,3V)
13 SPI: /CS Chip select (3,3V logic, low active, slave input)
14 SPI: MISO MISO (3,3V logic, slave output)
15 RxD Not used
shield wire AGND Analog ground
8.3.4 USB connector
The USB-C type connector supports USB 2.0 and allows the device to be controlled via a serial COM-
Port.
8.3.5 Ethernet connector
The RJ45 Ethernet connector allows the device to be controlled via a Telnet connection.
8.3.6 Power supply connector
The power supply connector is a low voltage socket with a 2.1 mm pin. The supply voltage range is