4
Hardware Manual
4.1
Output Connection Diagram
The actuator can be connected to the amplifier by either two 4mm banana plugs or a 2-way LEMO 0B
socket (LEMO EGG.0B.302.CLL). Preassembled LEMO cable assemblies are available from
www.PiezoDrive.com
The mating plug is a LEMO 0B 2-Way Straight Cable Plug. Ordering details and specifications are listed
below. These parts can be obtained directly from
www.mouser.com
Plug
LEMO 0B 2-Way Straight Cable Plug
Crimp Terminal Version
*LEMO FGG.0B.302.CYCZ
Solder Tag Version
LEMO FGG.0B.302.CLAZ
Max Conductor Size
AWG22
Cable Collet
FGG.0B.742.DN
Cable Diameter
3.1mm – 4mm
Strain Relief Boot
GMA.0B.035.DN (3.5–3.9mm Cable)
*The crimp terminal plug requires a tool, if this is not available, the solder tag plug should be used.
A two conductor cable is required to connect the amplifier to a transducer. A recommended cable is the
Belden 8451 cable. The specifications are listed below.
Cable
Belden 8451
Conductor Size
AWG22 (0.64mm diameter)
Resistance
53 mOhms/m
Capacitance
115 pF/m core–core, 220 pF/m core-shield
Outside Diameter
3.5mm
The actuator wiring diagram is shown below.
Female Panel Socket Male Cable Plug Actuator
HV +
GND
+
-
