PD200X4 V2 Manual
5
Modified 13/01/2021
5
Specifications
The amplifier specifications depend on the peak-to-peak output voltage listed in Table 1.
Electrical Specifications (per Channel)
Output Voltage (Peak to Peak)
100 Vp-p
150 Vp-p
200 Vp-p
Peak Current
2 A
2 A
2 A
RMS Current*
1.2 A
0.91 A
0.57 A
Pulse Current (optional)
10.0 A
10.0 A
10.0 A
Power Bandwidth
470 kHz
310 kHz
230 kHz
Gain
20 V/V (Custom gain available)
Slew Rate
150 V/us
Signal Bandwidth
680 kHz
Load
Any
Noise
714 uV RMS (10uF Load, 0.03 Hz to 1 MHz)
Protection
Continuous short-circuit, thermal
Voltage Monitor
1/20 V/V
Current Monitor
1 V/A
Analog Input
+/-10 V , Zin = 100k, protected up to +/-20V
Output Connectors
BNC, Screw Terminals, LEMO 0B
Power Supply
90 Vac to 250 Vac
Mechanical Specifications
Environment
0-40 C (32-104 F) Non-condensing humidity
Dimensions**
212 x 304.8 x 88 mm (8.35 x 12 x 3.46 in)
Weight
2 kg (4.4 lb)
* For AC signals greater than 100 Hz. The total RMS current limit for all four channels is 2.6 Arms,
which can occur with 100 Vp-p and 150 Vp-p models, or with large load capacitances with a power
bandwidth less than 100 Hz.
**A 3D Model is available at
