STR-50 “PIN STRIP”
INSTRUCTION MANUAL
Page 4
Date rev. 26/04/2016
Rev. 03
4. USE OF THE TOOL
While using the STR-50 pliers it is necessary to wear always protection glasses.
The comprehension of this manual is very simply and do not requires particular technical notions.
After the cutting length/pitch adjustment (Cap. 3) it is possible to use the pliers.
The sequence below shows how to use correctly the tool.
1.
Insert the connector between the cutting blades.
2.
Place the longer metal pin on the sliding adjustable blade stop (Fig.2).
3.
Tighten the pliers until the desired cut is made.
The cut of a single pin, should be realized without making adjustments on the sliding blade, leaving in any
case the blade on, eventually moved toward the outside.
N.B.
- Do not use as stop the plastic body of the pin-strip, but exclusively the metal pin.
- Do not tighten the pliers without first completely screw the fixing blade knob.
MAINTENANCE:
Periodically spray a lubricant such as SVITOL or similar on the central screw, to facilitate the opening/closing
movement.
5. TECHNICAL INFORMATION
Features:
Cutting force :
6 Kg
Blade material :
Tempered steel
Blade thickness :
1 mm
Cutting length/pitch :
max. 50 mm
Dimensions (Length) :
150 mm
Weight
:
100 gr
The information contained in this document may be changed without notice.
COMMERCIAL OFFICE :
PIERGIACOMI SUD SRL
VIA GRAMSCI 3 - 60022 CASTELFIDARDO (AN) – ITALY
tel. +39 071 78678-780 211
fax +39 071 7822 536
www.piergiacomi.com
–
TECHNICAL ASSISTANCE :
PIERGIACOMI SUD SRL
VIA 81A STRADA 3, FRAZ CENTOBUCHI,
63076 MONTEPRANDONE (AP) – ITALY
tel. +39 0735 703 333
fax +39 0735 703 757
