manualshive.com logo in svg

Pierce Enforcer, Руководство оператора


Поделиться
Скачать
background image

© 2018 Pierce Manufacturing Inc. All Rights Reserved.

Seats, Seat Belts, and Safety Restraints  /  4-11

GENERAL

The first officer side knee bolster is mounted in the modesty panel below the dash panel and is designed to protect 
the legs of the occupant, when used in combination with the seat belt, in the event of a frontal or oblique impact.

In the event of a frontal impact, the system will deploy the driver air bag and first officer knee bolster and activate 
the following components that are integrated into the driver and first officer cab seats:
•

Suspension safety seat system (S4S) will retract the suspension seat to its lowest travel position;

•

Belt pretensioners will pretension the seat belts to firmly hold the occupants in place;

•

Side Roll Protection air bags (if the truck has this option.)

4-3.5

Custom Cab Seat Mounting

Your Pierce Custom Cab has been assembled with a custom seating configuration which was specified by your 
department at the time of production. There may be unused mounting attachments or holes present in the vehicle 
that are not for your configuration. Seats, seat belts, crash protection air bags, and the cab structure all work together 
to provide proper occupant safety during a crash. Never re-mount your seats using these unused mounting 
accommodations. 
Reconfiguration of seats, seat belts, or occupant restraint system by anyone other than Pierce Manufacturing will 
void the warranty and may result in an unsafe condition.

4-3.6

SCBA Brackets Mounted in Seat Backs

Self Contained Breathing Apparatus (SCBA) bottle brackets are designed to hold the SCBA bottle in position while 
the firefighter is riding to the fire scene. Bottles mounted in seats without occupants must be fastened using the 
SCBA mounting bracket manufacturer’s restraining device. 

(Does not pertain to inertia-activated hands-free SCBA 

holders.)

 

SCBA harnesses are often manufactured using nylon straps and buckles similar in construction to seat belt buckles. 
Care must be taken to ensure that the occupant does not mistake the SCBA harness buckle for the seat belt buckle. 
We strongly recommend that fire companies check all SCBA harnesses to ensure that they are not interchangeable 
with the seat belt buckles and that all firefighters are trained to become aware of this danger.

The knee bolster air bag deploys with great force in the event of a crash. Do not place people or objects 
in the path of the bag. Objects flying from the bag deployment can injure or kill.

Avoid storing SCBA bottles in seat backs of seats that will not be occupied while the vehicle is in 
motion. SCBA bottles not secured properly in unoccupied seats could cause serious injury or death 
during a collision. 

(Does not pertain to inertia-activated hands-free SCBA holders.)

Always verify that the seat belt buckle and SCBA harness buckle are in their respective proper 
receptacle. Interchange between the SCBA harness and seat belt buckles will negate the benefit of the 
seat belt and death or serious injury may result.

Содержание Enforcer





































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Enforcer

U-Line H-2708 Quick Start Manual preview
H-2708
Бренд: U-Line Страницы: 3
freightliner cascadia Driver Manual preview
cascadia
Бренд: freightliner Страницы: 238
Shur-Co SHUR COVER Owner'S Manual preview
SHUR COVER
Бренд: Shur-Co Страницы: 24
DAF 480 Emergency Response Manual preview
480
Бренд: DAF Страницы: 59
U-Line BT H-1003 Manual preview
BT H-1003
Бренд: U-Line Страницы: 6
Dodge RAM 1500 2019 User Manual preview
RAM 1500 2019
Бренд: Dodge Страницы: 268

Бренды по названию

Популярные бренды

Загрузить еще бренды