PIEPS iPROBE BT 220 Скачать руководство пользователя страница 15

 

 

Manual PIEPS iPROBE BT | 08/2020 

 

                 15 / 17 

 

5.

 

DEVICE MANAGEMENT WITH THE PIEPS APP

 

Bluetooth and the PIEPS APP allow a straightforward device management (e.g. software update, device 
configuration) and additionally provide a handy training mode. 
Get the PIEPS APP (Android Play Store, iOS App Store), connect your PIEPS beacon and take advantage of all 
features! 
 

NOTICE

 

If the PIEPS APP is already installed, be aware to use the latest version 

 

To connect the PIEPS iPROBE BT with your Bluetooth-device, follow these instructions: 

1.

 

Activate the PIEPS iPROBE BT and lean it on a wall with the upturned probe tip within 60 seconds. 

2.

 

When the PIEPS iPROBE BT is ready to connect, this is confirmed with an acoustic (2x piep) and optical 
(simultaneous flashing of the green and blue LED-lights) signal (after approx. 10 seconds).  

3.

 

Follow the instructions of the device manager in the PIEPS App to build up a connection (Notice: When no 
connection is built up within 5 minutes, the PIEPS iPROBE BT needs to be deactivated and activated 
again.) 

4.

 

A successful connection is indicated with a permanent blue and a flashing green LED-light. 

5.

 

After a successful connection the system checks and updates can be performed. Therefore, follow the 
instructions in the PIEPS APP. 

6.

 

To end the Bluetooth-mode, unlink the PIEPS iPROBE BT in the PIEPS APP or turn the probe so the probe 
tip is on the ground again. 

7.

 

Bluetooth error: A Bluetooth error is indicated with a permanent red and a flashing green LED-light. 

 

NOTICE

 

The Bluetooth connection is automatically interrupted after 5 minutes of inactivity! 

 

 

DANGER

 

Risk of a not transmitting device due to enabled Bluetooth

 

The Bluetooth mode is supposed for device management and training mode only. Never use the 
Bluetooth mode in avalanche terrain!

 

 
In the PIEPS APP the following settings can be made: 

Feature

 

Possible Settings 

Admin Lock 

On/Off 

Transmitter deactivation

 

On/Off 

Volume 

 

Low / Medium / High 

Device-Check 

 

Battery capacity 

In % 

Reset to factory defaults 

 

 

Further useful features of the PIEPS APP: 

 

Software Updates 

 

Training mode 

 

Practical scenarios 

 

Fleet management 

 

 

Содержание iPROBE BT 220


















Отзывы: