Positioning and Connecting the Loudspeakers
Perfect sound quality depends on the correct positioning and alignment of the loudspeakers. For
stereo operation, the best results are achieved using the <<stereo triangle>> layout. The MasterONE
should be positioned as described below.
________________________________________
Positioning
The distances between the loudspeakers and the
point of listening form an isosceles triangle, Ratio
1 : 1.5, (e.g. two meters distance between the
speakers and three meters distance to the
listening position/stereo triangle)
Turn the speakers approximately 10° inward
towards the desired point of listening
Position in as clear a space as possible with
clearance at the back and the sides
Recommended wall distance min. 50 cm
To isolate your loudspeakers from the floor, please
use spikes or pucks with a similar effect.
________________________________________
Connecting the Loudspeakers
Ensure that the electronic components are
switched off before making the connection.
The PIEGA MasterONE should be run with a
sufficiently powerful amplifier with a good sound
quality.
Contact your dealer if you are unsure whether the
amplifier is powerful enough.
Ideally, use the OPUS 1 loudspeaker cable
(optional) as this is optimized to the sound of
PIEGAs coaxial system.
Ensure the poles are connected correctly: The plus
pole of the loudspeaker (red socket) must be
connected with the plus pole of the
amplifier/control system, the minus pole of the
loudspeaker (black socket) must be connected
with the minus pole of the amplifier/control
system.
- 4 -
