PictureTel LIVE100, Руководство по установке, Страница: 171 / 196

Deinstalling PictureTel Live Versions Earlier than 1.5
E-5
b. In the [BOOT] section, restore the line:
user.exe=C:\PCS\LiveSHAR\user.exe
to:
user.exe=user.exe
c. In the [BOOT] section, restore the line
gdi.exe=C:\PCS\LiveSHAR\gdi.exe
to:
gdi.exe=gdi.exe
d. In the [386ENH] section, remove the line:
DEVICE=C:\PCS\PICTEL00.386
and similar lines, where 00 may be replaced with 01, 02, and
so on.
e. In the [386] section, remove the EMM.EXCLUDE statement
that corresponds to the PictureTel Live memory address
range:
EMMExclude
f. Write down the system settings in the [PICTEL00] section,
so that you can use the same settings when you install the
1.5 version of the PictureTel Live software. These settings are
similar to the following lines:
PICTEL_IO=nnnn
PICTEL_IRQ=nn
PICTEL_MEM=nnnn
g. Entirely remove the section:
[PICTEL00]
and similar sections, where 00 may be replaced with 01, 02,
and so on.
h. Entirely remove the section:
[Live Share]
6. Delete these files:
C:\WINDOWS\PCS100.INI
C:\WINDOWS\VCSWIN.INI
C:\WINDOWS\*.PCS