NOISE LEVEL, VIBRATION & EMISSIONS
The typical A
-
weighted noise level determined according to
EN60745
:
Sound pressure level (LpA): 90 dB (A)
Sound power level (LWA): 103 dB (A)
WEAR EAR PROTECTION
Emissions during actual use of the machine can differ from declared values depending on the ways that the
machine is used. Safety measures to protect the operator should be determined by actual conditions, taking into
account all aspects of the operating cycle (such as when the machine is switched off and when it is running idle).
Due to continuing product development, the specifications herein are subject to change without notice.
8
This section contains important safety information. Failure to comply could result in serious injury or loss
of hearing.
9
Picote Solutions Oy Ltd www.picotesolutions.com
Hand vibration levels depend on the tool head distance to user and working conditions. Vibration levels in here
have been measured during normal lining work activities at working site in Finland. Vibration has been deter-
mined according to ISO
-
5349 and EU
-
directive 2002/44/EG. In table above are shown safe daily exposure time for
user.
Exposure Action Value (EAV) 2,5 m/s
2
Exposure Limit Value (ELV) 5,0 m/s
2
VIBRATION
Tooling
Working Distance
EAV
ELV
Twister DN100 /
4”
2m / 6.6ft
Over 24h
Over 24h
Twister DN100 /
4”
12m / 39.4ft
13h 25 min
Over 24h
Original Cleaning Chain
DN150 /
6”
0
-
2m / 0
-
6.6ft
1h 33min
6h 11 min
Original Cleaning Chain
DN150 /
6”
10m / 32.8ft
3h 14min
12h 57min
