Marine Internet Modem (MIM200) Instructions
Version 1 - 2020
Power
Power to the modem is supplied via the combination network/power cable (10m) with a
splitter to be plugged into the network cable at the powered side. The splitter injects the
power from the boat supply into the network cable. One side of the splitter includes a
length of power cable with bare wires. These are to be connected to the boats power
supply. The modem will operate from either 12 or 24VDC. It is necessary to wire the
modem to a 2AMP fuse (not included) or circuit breaker.
