pico ADC100/101
installation guide
Version 1.2
Page 1
1 English
1.1 Introduction
The PICO ADC-100 and ADC-101 are high speed analog to
digital converters with two input channels and software
controlled voltage ranges.
The units are supplied with ready-to-use DOS and Windows
Virtual Instrument and data logging software: alternatively, you
can use the ADC driver software to develop your own
programs to collect and analyse data from the unit. The
software includes:
C
PicoScope: Virtual Instrument programs which enable
you to use the ADC-100/101 like an Oscilloscope,
Spectrum Analyser or Voltmeter
C
PicoLog: Programs to carry out data logging and
analysis
C
adc100.exe: A DOS program for the collection of a
large number of samples to a text file.
pico ADC100/101
installation guide
Page 2
Version 1.1
This manual describes the physical and electrical properties
of the ADC-100/101, and explains how to install the software.
For information about the software supplied with the unit,
please refer to the following documents:
Product
Document
PicoScope for Windows
PicoScope for Windows help file
PicoScope for DOS
PS.TXT
PicoLog for DOS
PL.TXT
PicoLog for Windows
PicoLog for Windows help file
ADC100 drivers
Driver help file
or ADC100.TXT (text file)
