Pico Technology
Quick Start Guide
DO225-1 3
4.
Battery replacement
To remove the battery:
1. Place the interface face down and remove
the four securing screws.
2. Remove the base cover
3. Lift the battery away from the connections
4. Place new battery in position, replace the
base cover and secure.
5.
Connections
•
C
onnect your PicoScope to your computer using the blue USB cable
supplied.
•
Connect the interface box to the PicoScope
by means of the BNC cables.
•
Open PicoScope.
•
Connect the accelerometer to the three
axis interface.
6.
Magnet mounting instructions
DO
ensure a correctly prepared mounting surface is available. This is critical
for obtaining reliable measurements.
1.
Verify the mounting surface is clean, flat and smooth.
2. Slide the keeper off the mounting magnet.
3. Mount the magnet/sensor assembly to the prepared test surface by
gently rolling it into place. This will avoid damaging the surface.
DO
ensure that when in storage and in transit the keeper is fitted to the
magnet, to protect the magnet itself and nearby objects.
DO NOT
mount the accelerometer carelessly as this has the potential to
generate very high (and damaging)
g
levels.
7.
Troubleshooting
Problem
Check
Action
Interface not
working
Is LED
Flashing?
Yes Check BNC lead
No
Connect or change sensor
Replace battery
NVH
Inte
rface
TA143
Y
X
Z
Sensor
X
Y
Z
Inte
rface
riešenia na presné meranie
http://www.elso.sk
