pico Technology PicoScope, Быстрый старт

Страница: 4 / 11

Quick Start Guide PicoScope uSB Oscilloscope
dO231-1 copyright © 2006-2013 Pico technology Ltd. all rights reserved. 9
1 English
1.1 Introduction
Thank you for purchasing a Pico Technology PC Oscilloscope. This guide explains how
to install the software, including the product manual, from the disc supplied.
Once you have finished the basic installation, the
User’s Guide and Data Sheet will
provide further information about setting up and using the oscilloscope.
1.2 Safety information
To prevent possible electrical shock, fire, personal injury, or product damage, carefully
read this safety information before using the product. In addition, follow all generally
accepted safety practices and procedures for working with and around electricity.
The product has been designed and tested in accordance with the European standard
publication EN 61010-1:2010, and left the factory in a safe condition. The following
safety descriptions are found throughout this guide:
A WARNING
identifies conditions or practices that could result in injury or death.
A CAUTION
identifies conditions or practices that could result in damage to the
product or equipment to which it is connected.
Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols Description
Direct current.
Alternating current.
Chassis ground terminal. This symbol is now used in place of the
equipotential symbol which may appear on older products.
Equipment protected throughout by double insulation or
reinforced insulation.
Possibility of electric shock.
Caution.
Static awareness. Static discharge can damage parts.
EN61010 measurement category.
Do not dispose of this product as unsorted municipal waste.