pico Technology PicoScope 6000A Series, Руководство пользователя

Страница: 7 / 16

PicoScope 6000A/B Series User's Guide 3
Copyright © 2012 Pico Technology Ltd. All rights reserved. ps6000ab.en
2.4
FCC notice
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to
Part 15 of the FCC Rules . These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his or her own
expense.
For safety and maintenance information see the safety warning .
2.5
CE notice
The product meets the intent of the EMC directive 89/336/EEC and has been tested
to EN61326-1:2006 Class A Emissions and Immunity standard.
The product also meets the intent of the Low Voltage Directive and has been
designed to meet the BS EN 61010-1:2001 IEC 61010-1:2001 Safety
requirements for electrical equipment for measurement, control, and
laboratory use
standard.
2.6
Software licence conditions
The material contained in this software release is licensed, not sold. Pico Technology
Limited ('Pico') grants a license to the person who installs this software, subject to
the conditions listed below.
Access. The licensee agrees to allow access to this software only to persons who have
been informed of and agree to abide by these conditions.
Usage. The software in this release is for use only with Pico Technology products or
with data collected using Pico products.
Copyright. Pico claims the copyright of and reserves the rights to all material
(software, documents etc.) contained in this release.
Liability. Pico and its agents shall not be liable for any loss, damage or injury,
howsoever caused, related to the use of Pico equipment or software, unless excluded
by statute.
Fitness for purpose. No two applications are the same, so Pico cannot guarantee
that its equipment or software is suitable for a given application. It is therefore the
user's responsibility to ensure that the product is suitable for the user's application.
Mission-critical applications. Because the software runs on a computer that may be
running other software products, and may be subject to interference from these other
products, this license specifically excludes usage in 'mission-critical' applications, for
example life-support systems.
Viruses. This software was continuously monitored for viruses during production.
However, the user is responsible for virus checking the software once it is installed.
Support. No software is ever error-free, but if you are dissatisfied with the
performance of this software, please contact our technical support staff.