VSM-3/4S
7
Rev. 05/03
Ph:800-421-6511
www.picomacom.com
Installation Procedure
1.
Connect your existing Cable or Antenna cable to the “ANT-IN” port on the modulator.
NOTE:
If you have a flat type antenna wire you will need the appropriate transformer.
2.
Connect the modulator’s “TO-TV” port to your television using a standard 75-Ohm Coaxial Cable.
NOTE:
If your TV is not cable-ready you will need to install the appropriate transformer.
3.
Connect your Video Component’s video and audio output jacks to the RF Modulator's corresponding “Video”, “Audio L”, and
“Audio R” using the appropriate Audio/Video Patch Cord or Audio/Video/S-VHS Patch Cord. Most Audio/Video Patch Cords
are color coded for ease of installation.
4.
Connect the modulator’s AC power cable to an existing 120VAC power receptacle.
Installation
1
Existing
coaxial cable
to antenna
Existing
flat cable
to antenna
*Transformer
*Not Included
Note:
Accessories nec-
essary for proper
installation may
be obtained from
your retailer.
*
Coaxial Cable
*Transformer
*
Coaxial Cable
RF Modulator
RF Modulator
*
Video Patch
Cord
*
S-VHS
Audio-Video
Cable
RF Modulator
Your Video Component
DVD/VCR–Game System–Camcorder
Your Video Component
with S-Video
2
3
