Pico Macom SSP-10/2150A, Инструкция по установке и эксплуатации, Страница: 5 / 8

PICO MACOM, INC.
12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
FRONT & REAR PANELS
1. "OC"
When the "VERTICAL OC" is lit, this indi-
cates an open circuit at the vertical LNB.
When the "HORIZONTAL OC" is lit, this
indicates an open circuit at the horizontal
LNB.
2. "SC"
The "SC" LED's indicate a short between
the SSP-10 and the LNB. Both will activate if
either vertical or horizontal polarity are in a
short circuit condition. It is recommended to
deactivate the SSP-10/2150A until the pro-
blem is corected.
3. LNB Inputs:
These inputs provide DC power to the LNB's
4
P A N E L S
4. High Outputs:
These outputs provide an additional 6 dB of
signal to the input of the receivers if needed.
5. Outputs to Receivers:
These outputs provide approximately the same
signal level to the input of the receivers as that
of the LNB's, less cable loss.
6. Vertical and Horizontal Adjustments:
If the "OC" LED remains on after the LNB's
are connected to the SSP-10/2150A, Rotate
the adjustment (top of case) until the LED
shuts off.
7. Power Jack:
Input jack for 24Vdc, 1A wall adapter
SATELLITE SIGNAL PROCESSOR
SSP-10/2150A
VERT HORIZ
OC SC SC OC
1 2
6
+ +
OUTPUTS
HIGH
OUTPUT
VERT.
HORZ.
+
+
+
+
5 4
TO
LNB
5 4
3 2 1
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
24vDC
1A
7