PM-SE
Installation
3
Rev. 02/04
Ph: 800-421-6511
www.picomacom.com
BTSC Stereo Encoder
OUTPUT
R
L
VIDEO
AUDIO
INPUT
SATELLITE
ANT IN
PCM55SAW Modulator
Satellite Receiver
RF OUT
120VAC
60Hz 10W
AUDIO IN
VIDEO IN
600 VA MAX
+
+
+
+
+
+
+
Ground Connection
Power
Ordering Information
PM-SE
BTSC Stereo Encoder
1.
Disable or bypass the audio preemphasis circuit of the modulator and remount in rack before connecting the PM-SE.*
2.
Connect a cable between the BTSC audio output of the PM-SE and the audio input of the modulator.
3.
Connect a cable between the video output of the receiver and the video input of the PM-SE.
4.
Connect a cable between the video output of the PM-SE and the video input of the modulator.
5.
Connect a cable between the left audio output of the receiver and the left audio input of the PM-SE.
6.
Connect a cable between the power output of the AC/DC adaptor and the dc power input of the PM-SE.
7.
Plug the AC/DC adaptor into a stable power receptacle.
8.
Connect a copper ground wire between the ground lug of the PM-SE and a common earth ground.
* Note:
Refer to the modulator owner’s manual or contact the manufacturer for help completing this step.
Installation
