5
Rev. 03/06
Ph: 800-421-6511
www.picomacom.com
Pico-Pro User Manual
PICO-PRO
3.2.5 Channel Amend Set
This key lets you modify and correct the level
using a known reference level. When
“CHAN AMEND” is highlighted, press “ENT”
to confirm; the LCD will display:
Press key
s
or
t
to change the channel to
be amended. Press key “F1” or “F2” to change
the Video or Audio mode. Press “F3” or “F4”
to correct data (the range is ±5 dB). Press
“ENT” to confirm and save the data to build in
memory. Press “CLR” to cancel the current
operation and escape to the previous menu.
3.2.6 Clear Channel Amend Value
Press key
s
or
t
, when “CLR AMEND
VALUE” is highlighted, press key “ENT”; the
LCD will display:
Press “F2” or “F3” then press “ENT” or “CLR”
to confirm or cancel the operation.
3.2.7 Scan Audio Carrier
Press key
s
or
t
to select, when the “SCAN
AUDIO” is highlighted, press “ENT”; the LCD
will display:
Pressing “F2” will scan Audio and Video
carrier simultaneously at Channel Scan mode.
Pressing “F3” will only scan Video carrier at
Channel Scan mode.
3.2.8 Communication Port Set (Opt.)
Press key
s
or
t
, when “INTERFACE SET”
is highlighted, press “ENT”; the LCD will
display:
a.
The COM port is RS232C serial type.
Default Baud Rate of the current Version
is 9600bps.
b.
Serial printing port is required for the
printer.(EPSON LX-300)
c.
Print Scale is valid for screen printing.
It means printing at rate of 1:1 or 1:2 by
comparing the screen matrix. The default
printing rate is 1:1.
3.2.9 Channel Plan Select
Press key
s
or
t
to select. When mark
(arrow head) is pointed to “CHANNEL PLAN”,
press “ENT” to confirm; LCD will display:
Select the desired “CHANNEL PLAN” using
s
or
t
.
Pico Pro Manual 06.qxd 4/10/06 3:20 PM Page 5
