PICO MACOM
Fiber Optic
Series
6260 Sequence Drive San Diego, CA 92121
Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051
Rev. 9/07
www.
picomacom
.com
Optical Output
Power in dBm:
6, 7, 8, 9, 10, 11, 12, 13, 14 dBm
Optical Wavelength:
1310nm
Laser Type:
DFB
Optical Connector Type:
SC/APC (FC/APC Optional)
RF Frequency Range:
50~860 MHz
RF Input Level Range:
+15 to 20dBmV
RF Input Impedance:
75
Ω
In-Band Flatness:
±1dB
Input Return Loss:
>15dB
Carrier-to-Noise
(CNR)
*:
>50dB
Composite Second
Order
(CSO)
*:
>60dB
Composite Triple Beat
(CTB
)*:
>65dB
AGC Control Range:
±5dB
MGC Control Range:
±5dB
Power Supply Range:
90-264 Vac
Power Consumption (typical):
30 watts
Operating Temperature:
0° to 50°C
Storage Temperature:
-20° to +65°C
Relative Humidity:
<10%
Dimensions:
19˝ W x 13˝ D x 1.75˝ H
Weight:
9.15 lbs.
Specifications
PFT - 6
(6dBm or 4mW) - 1310nm Optical Transmitter
PFT - 7
(7dBm or 5mW) - 1310nm Optical Transmitter
PFT - 8
(8dBm or 7mW) - 1310nm Optical Transmitter
PFT - 9
(9dBm or 8mW) - 1310nm Optical Transmitter
PFT - 10
(10dBm or 10mW) - 1310nm Optical Transmitter
PFT - 11
(11dBm or 14mW) - 1310nm Optical Transmitter
PFT - 12
(12dBm or 16mW) - 1310nm Optical Transmitter
PFT - 13
(13dBm or 20mW) - 1310nm Optical Transmitter
PFT - 14
(14dBm or 26mW) - 1310nm Optical Transmitter
90-240VAC
47-63HZ
REMOTE CONTROL
RF IN
OPTICAL OUT
Rear View
Front View
Ordering
Information
* Test results are typical and were performed at our San Diego test center using an 80 channel NTSC Matrix generator as the RF source, appropriate optical
loss budget for the 1310nm transmitter being tested and optical receiver input level of -1dBm
.
1310 nm OPTICAL TRANSMITTER
STATUS
STATUS
RF AGC ON/OFF
RF AGC ON/OFF
MGC
ADJUST
LASER
LASER ON/OFF
LASER ON/OFF
RF
AGC
MGC
RF
RF
RF TEST PORT
PFT-1310mn Optical Transmitter
