PFAD900CS
Channels:
125 Channels
(CATV 2 – 125, TV 2-69)
HRC/IRC offsets
Input Level:
Single channel
+40 dBmV max.
60 channels
+20 dBmV max.
Image Rejection:
(@ -47 dBmV input)
VHF = 70 dB, UHF = 60 dB
(@ -17 dBmV input)
VHF = 60 dB, UHF = 50 dB
Noise Figure:
VHF = 8 dB, UHF = 8 dB
Output Level:
0.5 to 1 V p-p
Impedance:
75 Ohms
Bandwidth:
DC to 4.2 MHz
Frequency Response:
± 1.5 dB
Differential Gain:
<5% (10 to 90% APL)
Differential Phase:
<5° (10 to 90% APL)
Detector Type:
Envelope
Signal to Noise Ratio:
>60dB minimum
Power Input:
117 VAC 60 Hz
Operating Temperature:
-10° C to +50° C
Dimensions:
19˝(L) x 3˝(D) x 1
3
/
4
˝(H)
Weight:
3.8 lbs.
Output Level:
800 mV min. deemphasized
Output Impedance:
600 Ohms
Frequency Response:
20 Hz to 15 kHz
Detection Type:
Quadrature FM
4.5 MHz Sub-Carrier Output Level:
35 dBmV
MPX output level:
800 mV unbalanced @
600 Ohms
RF
Video
Audio
General
Product Specifications
806MHz Agile CATV A/V Demodulator
RF IN
VIDEO OUT
IF OUT
4.5MHzOUT
AUDIO OUT
MPX OUT
600W MAX
120 VAC
60Hz 16W
Front View
Rear View
Ordering Information
PFAD-900CS
www.picomacom.com
A-26
Rev. 08/03
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
Specifications Subject to Change
© Copyright 2003 Pico Macom, Inc.
