DSP806
Product Specifications
Agile PLL SAW-Filtered Digital-Analog Channel Processor
DSP806
CH.TYPE
CH.
OUTPUT
ADJUST
TEST POINT
-30dB
IN/OUT
STORE
POWER
CATV SERIES
IF IN
IF OUT
125V FUSE
RF OUT
RF IN
117VAC
60Hz 35W
600W MAX
125VAC
0.5A
CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE
HAZARD, REPLACE ONLY WITH SAME TYPE 0.5A 125V FUSE
FUSE
Front View
Rear View
806MHz Agile PLL SAW-Filtered Digital-Analog Channel Processor
Input Frequency Range:
54 - 806 MHz
CATV Channels 2-125
UHF Channels 2-69
AGC Range:
-15 dBmV to +35 dBmV input
Impedance:
75 Ohms
Noise Figure:
8 dB
Image Rejection:
>80 dB
Output Frequency Range:
54 - 806 MHz
CATV Channels 2-125
UHF Channels 2-69
Output Level:
45 dBmV, adjust range 15 dB
Frequency Stability:
±5 kHz
Impedance:
75 Ohms
Flatness:
±0.2 dB
I.F. Frequency:
44 MHz SAW, digital center
Power Input:
105 to 130 VAC, 60 Hz, 15W
Operating Temperature:
-10°C to 50°C ambient
Dimensions:
19˝(L) x 9˝(D) x 1
3
/
4
˝(H)
Weight:
7.9 lbs.
RF Input
RF Output
General
Ordering Information
DSP806
www.picomacom.com
A-36
Rev. 12/02
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
Specifications Subject to Change
© Copyright 2003 Pico Macom, Inc.